Home/Emergency leak detection
Emergency Leak Detection in London
Emergency leak detection is the urgent location of a water leak that is damaging a property now, or cannot safely wait for a routine appointment. An engineer uses acoustic, thermal imaging, tracer gas and moisture equipment to find exactly where the water is escaping, so that the repair is aimed at the right spot and as little as possible is opened up. We take emergency calls 24 hours a day, 7 days a week, across London, for homes and commercial premises.
Quick answer
Emergency leak detection is the urgent location of a leak that is causing damage now. Turn off the water at the stopcock, switch off electrics at the consumer unit if water is near them, then call us. We take calls 24 hours a day across London, and we quote before work starts.
This page explains what counts as an emergency, what to do in the first few minutes, how we find a leak that cannot be seen, what happens when you call, and how our pricing works. If you are standing in water right now, read the first two sections, then call.
What Counts as an Emergency Leak
A leak is an emergency when water is escaping faster than you can contain it, when it is reaching electrics, ceilings or neighbours, or when you cannot stop it at the stopcock. Water spreads quickly through floors, walls and ceiling voids, and the longer it runs, the more plaster, timber, flooring and contents it reaches. Damp left in place can also lead to mould, so acting early limits both the damage and the repair scope. If you are unsure whether yours qualifies, describe it when you call and we will tell you honestly whether it needs an urgent visit or can wait for a daytime slot.
- Water coming through a ceiling, or a ceiling that is bulging or sagging.
- A burst or leaking pipe you cannot isolate.
- Water near sockets, light fittings, the consumer unit or appliances.
- Water running down walls, or pooling under floors or in a basement.
- A hidden leak that is still running, for example a meter that keeps turning with every tap off, or the sound of running water in a silent house.
- A leak affecting a neighbouring flat or unit.
- A commercial premises where water is reaching stock, equipment or shared areas.
What to Do in the First Minutes
What you do before an engineer arrives can reduce the damage considerably. Only do what is safe, and never put yourself at risk to save a possession.
If water is coming through a light fitting or near electrics, keep away from the area, switch off the power at the consumer unit if you can reach it without standing in water, and tell us when you call. Do not touch wet electrics.
- Turn off the water at the stopcock. It is usually under the kitchen sink, in a utility cupboard or near the front door. Turn it clockwise until it stops.
- Open the cold taps and flush the toilets to drain the system down once the water is off. This reduces how much water is left to escape.
- If you have central heating and the leak is on a heating pipe, switch the boiler off before draining anything.
- Switch off electrics at the consumer unit if water is near sockets, lights or appliances.
- Photograph the damage and the source before you start clearing up. Insurers usually want to see it.
- Move furniture, rugs and valuables away from the wet area and lift what you can off the floor.
- Use towels, buckets or a wet vacuum to contain water, and pierce a bulging ceiling only if you are sure it is safe and can catch the water.
- Do not dismantle pipework or open walls yourself. It can make the leak worse and hides evidence we need.
What Happens When You Call
Call and tell us what you can see or hear, where in the property it is, and your postcode. If you know where the stopcock is, or whether you have turned it off, say so. Photos help if you can send them. Tell us if anyone vulnerable is in the property, or if you have limited access, such as a locked basement or a key holder who is away.
We then tell you the rate that applies and give you a quote before work starts. Work is normally charged at an hourly rate. For customers who worry that the hourly rate will take too many hours, and for their peace of mind, we also offer a fixed price. Ask for it on the call if you would rather have certainty than an hourly rate.
We also tell you what we expect to do first and when we can attend, based on where you are and what is already booked. We will not promise an arrival time we cannot meet.
How Emergency Leak Detection Works
No single method finds every leak, so an engineer chooses the approach that fits the symptoms and often combines two or three. Detection is evidence gathering. It narrows the search to a small area and confirms it, but results depend on the pipework, the construction and the conditions on the day.
Acoustic detection listens for the sound a pressurised pipe makes where water escapes. It suits leaks on pressurised supply pipes and works well under floors and in walls, though traffic noise, plastic pipes and background plant can make it harder.
Thermal imaging shows temperature differences on a surface. A cold, wet patch behind a wall or a warm trail from a heating pipe under a floor can show up, which helps decide where to look next. It points to where heat or moisture is, not always to the exact break.
Tracer gas is used when other methods are inconclusive. A harmless gas mixture is introduced into the pipe, and a sensitive detector at the surface picks up where it escapes. It can help with small leaks and awkward layouts.
Moisture mapping uses meters to record how far water has travelled and how wet the materials are. It shows the extent of the damage, helps separate an active leak from older damp, and gives a record that is useful for drying and insurance.
What It Costs and How We Quote
We quote before work starts, so you know the position before we begin. Work is normally charged at an hourly rate. For customers who worry the hourly rate will take too many hours, and for their peace of mind, we also offer a fixed price.
The right option depends on how much is known. If the symptoms point clearly to one area, a fixed price can suit. If it is a vague or complicated situation, an hourly rate may be the fairer way to pay. Either way, you agree it first. Our pricing page explains the approach in more detail.
After the Leak Is Found
The first priority is making the property safe: stopping the water, isolating the affected pipe where possible and advising on electrics. We then explain where the leak is, what caused it, and what the options are for repair, with the repair quoted before work starts.
Reaching a leak often means opening a floor, wall or ceiling. We aim to keep the opening as small as the evidence allows and discuss it with you first. Where the repair is a plumbing job, our water leak repair service covers it. Where access work is involved, our trace and access service covers opening up and making good.
If you are claiming on insurance, tell us on the call. Where it is relevant, we can provide a written report covering the cause, the location, the methods used and photographs. Your insurer decides what it needs, so check their requirements early and keep your own photographs and receipts.
When It Is Not an Emergency
Not every leak needs a call in the middle of the night. If the water is stopped and the damage is not spreading, a daytime appointment is usually the sensible and less costly choice. Our general leak detection service covers planned visits.
Examples that can often wait for a daytime slot include a slow drip you have isolated, a small damp patch that has not changed, a gradual rise in the water bill, or a stain you are not sure is active. Keep the water off in the affected area, watch whether it changes, and book a visit. If it gets worse, treat it as an emergency.
Quote before we travel
Work is normally charged at an hourly rate, quoted up front, and we can agree a fixed price before work starts if you would rather not pay by the hour.
No find, no fee
If we cannot locate a confirmed live leak with multi-method kit, you do not pay the detection fee.
Insurer-ready evidence
Cause, origin, methods, moisture map and photos when your claim needs more than a one-line invoice.
London coverage
Available across all 33 boroughs
Same multi-method approach from Barking to Richmond. Browse a borough for local housing notes, or send your postcode for a quoted slot.
Frequently asked questions
Is a hidden leak with no flooding an emergency?
It can be. A meter that keeps moving with everything off, the sound of running water in a quiet house, or a damp patch that is growing all suggest water is escaping now. If you can turn the water off and the damage is not spreading, it can wait for a daytime visit. If it keeps running or is getting worse, call us any time.
How much does emergency leak detection cost?
We quote before work starts. Work is normally charged at an hourly rate. If you worry the hourly rate will take too many hours, and for your peace of mind, we also offer a fixed price. Ask for it when you call. We will tell you the rate and quote before we begin.
How quickly can you get to me?
We take calls 24 hours a day, 7 days a week. When you call, we tell you when we can attend based on your location and what is already booked. We do not promise a set arrival time, because it depends on traffic, distance and demand, but we will give you a straight estimate.
What should I do before the engineer arrives?
Turn off the water at the stopcock, drain down the taps, and switch off electrics at the consumer unit if water is near them. Photograph the damage for your insurer, move belongings away from the water and contain what you can. Do not open walls or dismantle pipework yourself.
Can you find a leak without damaging my property?
Often most of the investigation is non-invasive, using acoustic listening, thermal imaging, tracer gas and moisture meters. Sometimes a small opening is still needed to confirm the leak or to repair it. We explain where and why before we open anything.
How accurate is leak detection?
Detection narrows a search down to a small area and confirms it with evidence, which is far better than guessing. No method is perfect. Results depend on the pipework, the building and the conditions, which is why we often use more than one method and will tell you if a result is uncertain.
What happens once the leak is found?
We make the property safe, explain the cause and location, and quote the repair before work starts. Depending on the job, we can repair it ourselves or advise on what is needed. Where access is required, we discuss the size of the opening with you first.
Can you help with an insurance claim?
Where relevant, we can provide a written report with the cause, location, methods used and photographs. Tell us at the start that you are claiming. Your insurer decides what evidence it needs, so contact them early, and keep your own photographs, notes and receipts.
Keep reading
Related guides
Emergency · 10 min read
What to Do in a Plumbing Emergency in London: The First Hour, in Order
Almost every avoidable cost in a plumbing emergency comes from doing the right things in the wrong order. This is the sequence for the first hour, what changes in a London flat, and the mistakes that turn a contained incident into a claim.
ReadLeak Detection · 3 min read
Water Coming Through the Ceiling: What to Do Immediately
Water coming through your ceiling demands immediate action. Here are the urgent steps to take and why you need a 24/7 leak detection specialist now.
ReadEmergency · 3 min read
How Fast Should an Emergency Plumber Arrive in London? Urgent Response Times Explained
When a pipe bursts or a leak floods your home, every minute counts. We explain the critical response times you should expect from a true emergency plumbing service in London.
ReadSuspect a leak in your London home?
Tell us the symptoms and your postcode. Quote before work starts, agreed arrival window, no find no fee. All confirmed before you book.
Book a detection visit